How to Replace the Fuses in a Mercury Villager

In 1993, Ford introduced the Mercury Villager minivan to its lineup. If you have a model made from 1993 to 2002, you can easily replace a blown fuse for an electrical issue yourself. All the model years have a similar set up, so you can locate and replace the fuse in just a few minutes.

Instructions

1

Locate the Mercury Villager minivan's fuse box below and to the left of the steering wheel by the brake pedal. Open the panel to remove the fuse puller.

2

Read the cover of the fuse panel to identify the location of the fuse needing to be replaced.

3

Use the fuse puller and remove the appropriate fuse. Verify that it's not working by looking at the inside to see whether the wire is burned out or not.

4

Replace the broken fuse with one of the same amperage. Check the amperage on the fuse box cover to make sure you have the right one.

5

Snap the new fuse firmly in place and close the fuse box. Restart the Mercury Villager to verify the new fuse is working.