How to Mix 3M Bondo

3M Corporation manufacturers a variety of products sold under the name of Bondo. Bondo is a body filler used in repair shops to fill in dents and scratches in metal. 3M Bondo consists of two parts: the body filler paste and the hardener. The hardener comes in a tube. The body filler begins to stiffen after you apply the hardener. You can mix 3M Bondo without the help of a professional.

Instructions

1

Put on the rubber gloves. Wear the rubber gloves while mixing and applying Bondo.

2

Dip the plastic spatula into the Bondo can. Put the body filler paste on the plastic tray.

Use a portion of body filler that is about 3 inches in diameter and 1/2 inch in depth.

3

Pick up the tube of hardener. Kneed the tube with your thumb and fingers. Move the hardener back and forth in the tube.

4

Open the tube of hardener. Apply a strip about 3 inches long onto the paste.

5

Mix the hardener into the paste with the plastic spatula. Move the spatula back and forth to mix the hardener and the paste. Thoroughly mix the hardener into the paste. Apply the Bondo.