Over time, your vehicle's radiator can corrode and wear out, causing leaks and overheating. If you have a Hyundai Santa Fe, replacing the radiator is a fairly difficult project because you have to remove so many engine components before you replace the radiator. However, if you have mechanical know how, you may want to tackle the job. Here's how to replace the radiator in the popular 2001 Hyundai Santa Fe.
Instructions
- 1
Remove the air duct and disconnect the negative battery cable. Take off the air cleaner assembly, and drain the cooling system into a resealable container. Take off the radiator's inlet hose and remove the transmission's cooler lines.
2Take off the fan shroud clips on the condenser tubes, and remove the bolts that connect the fan shroud to the condenser bracket. Remove the air deflectors.
3Disconnect the coolant hose from the radiator overflow and take off the radiator support brackets on the fan shroud. Disconnect the electrical connectors on the engine cooling fan motor, and remove the fan motor harness from the fan shroud clips. Remove the fan shroud.
4Take off the radiator's outlet hose and disconnect the transaxle oil cooler pipes.
5Tile the radiator towards the rear and remove the condenser brackets. Lift the condenser brackets and the mounting tabs and position them out of the way. Lift the radiator carefully out of the engine compartment and install the new radiator.
6Reinstall and reconnect the engine components in the reverse order that they were removed.
7Fill the new radiator with a mixture of half water and half engine coolant. Start the engine and let it run for a couple of minutes, then turn it off and add more fluids, if necessary. Reattach the negative battery cable.
0 comments:
Post a Comment