How to Replace the Wiper Blades on an Acura Integra

If you've ever been driving down the road in adverse weather conditions you know how important it is to have a good set of wiper blades on your car. When it comes to driving the sporty little Acura Integra, replacing your wiper blades takes just 10 minutes. Here's how to replace them in a jiffy.

Instructions

1

Stand each wiper arm up so that it is away from the windshield. The wiper arms will naturally hold in place once you raise them past a certain point.

2

Push in the "lock pin" (now exposed on the underside) and disconnect the blade assembly. It's important that you hold the lock tab in while you push the blade assembly toward the bottom of the arm.

3

Grab the tabbed end of the old wiper blade and remove it from its track. This will take a firm pull on your part.

4

Push the new wiper blade into the holder until you hear the tabs lock.

5

Slide the wiper blade onto the wiper arm you just installed. This needs to lock into place. Continue sliding until you hear a click.

6

Repeat this process on the other wiper blade arm. When you've completed them both, lower the arms back down so they are resting against the windshield.

7

Test your new wiper blades by turning on the battery of your Acura Integra and squirting washer fluid on the window. Your wiper blades will follow with several automatic swipes which will remove the fluid.