How to Replace the Front Signal Lights in a Cadillac Escalade

The Cadillac Escalade is a beautiful top-end vehicle that has many extras in regard to safety. Keep your Cadillac looking classy and driving safe with the turning signals in working condition, especially when it is so easy to replace the bulb yourself. This information is for model years 1999 and newer.

Instructions

1

Turn all the lights in the vehicle to the off position and make sure the engine is off before replacing any bulbs.

2

Go to the front of the Escalade and open the hood. Now go to the side of the vehicle just in front of the front tire where the headlamp cover is located. There are two screws holding the parking lights and turn signal bulb assembly onto the front of the vehicle. Remove those two screws.

3

Pull the parking light and turn signal assembly over toward the outer side
of the Escalade as you pull the assembly. There are three tabs that will come straight out of the grill as you pull it.

4

Locate the turn signal bulb closest to the outside edge of the light assembly. Turn the electrical socket counter clockwise to take off the turn signal bulb from the assembly.

5

Replace the old bulb with the new bulb trade number 2357NA that you can purchase at any auto parts store.

6

Slide the parking and turn signal lamp assembly back onto the vehicle, moving it toward the middle of the front. Stop when the tabs slip onto the grille. Put the two screws back on to hold the lamp cover back on to the vehicle. Test the turn signals to make sure they work.