How to Replace a Power Mirror in a Ford Taurus

The Ford Taurus power mirror's construction makes it a somewhat complex replacement project that may be a little difficult for the average vehicle owner. The project only requires a few basic tools for all model years.

Instructions

Remove Old Mirror

1

Disconnect the negative battery cable before you take the front door trim panel off the Taurus door. Remove all screws and clips and carefully prying the panel from the door.

2

Detach the power mirror electrical wire connector located under the door panel.

3

Take off any wiring guides that you need to remove the mirror. Remove three nuts from the power mirror.

4

Pull the outside rear view mirror off, and guide the power wire through the hole in the door.

Install New Mirror

5

Replace the old mirror with the new one by first pushing the new wiring through the hole in the door.

6

Install and tighten the three retaining nuts you took off when removing the old mirror.

7

Connect the power mirror wiring to the connection located on the door panel.

8

Put the front door trim panel back in place by securing all clips and tightening all screws.

9

Connect the Ford Taurus' battery cable to restore the power.